Ultra Electronics, Nuclear Sensors & Process Instrumentation
- PO Box 300
- Round Rock, TX 78680-0300
- Tel. Toll Free: 800-880-9333
- Tel.: 512-434-2800
Ultra Electronics, Nuclear Sensors & Process Instrumentation is a business name of Weed Instrument Co., Inc.
|
|
Unmanaged and Managed Industrial Ethernet Switches for Every Application:
Ethernet/IP stands for "Ethernet Industrial Protocol." It is an open industrial networking standard that takes advantage of commercial, off-the-shelf Ethernet communication chips and physical media. EtherNet/IP technology has evolved due to the high demand for Ethernet control applications. This standard also stems from the control industries' need for interoperability among various Ethernet control products.
Ethernet/IP is an open network because it uses standard Ethernet IEEE 802.3, TCP/IP protocol suite, and CIP (Common Industrial Protocol), the real-time I/O and information protocol that ControlNet networks use.
For small Ethernet networks, Ultra Electronics, NSPI offers the EOTec 2000 series of unmanaged Ethernet switched media converters and unmanaged switches. For networks that require ring redundancy, we offer the economical the EOTec 2104 Ethernet Ring Switch. For more complex networks, we provide the managed EOTec G408M Gigabit Ethernet switches, and the Lynx light to fully managed series of switches.
 |
EOTec G408M Industrial Gigabit Ethernet Switch
The EOTec G408M features advanced capabilities typically found in a managed switch plus a Self-Healing Ring function
Network traffic is rerouted in milliseconds when a fiber or cable break is detected on any of the ring ports. An alarm output, available on the terminal block, can be used to signal error conditions to a PLC or other supervisory devices.
Ports 1-4 are copper only; ports 5-8 can be either copper or fiber ports. The fiber ports offer LC type connections and a variety of SFP fiber transceivers are available for differing fiber types and lengths.
Features:
- Eight 10/100/1000Mbps copper ports, four can be 100/1000Mbps Single and/or Multimode fiber ports
- Fault-tolerant Self-Healing Ring (SHR) with 30 mS plus 5 mS per hop recovery time
- Operating Temperature -40 to 75°C
- Long-haul fiber distances up to 80 km (49 miles)
- 10 to 30VDC operation, 15W
- Dual power inputs
- DIN rail mountable
|
 |
EOTec 2104 Industrial Ethernet Ring Switch
The new EOTec 2104 Industrial Ethernet Ring Switch is designed to fill the gap between unmanaged and managed Ethernet switches. Available in five different models, the EOTec 2104 features the ease of use of a typical unmanaged switch plus advanced capabilities that are only found in a managed switch, including ring functionality.
When connected in a ring topology, an EOTec 2104 increases network reliability by providing an alternative path for message flow in the event of a network segment failure. When it detects a communications break, it quickly notifies the other switches in the ring and messages are automatically rerouted through the alternative ring path within milliseconds
Features:
- Ethernet compliancy IEEE 802.3, 802.3u, 802.3x, 802.3z, 802.1p and more
- Supports Traffic Prioritization IEEE 802.1p, Q0S, CoS, ToS for real time data transfer
- Port mirroring for mapping messages between ports
- Message rate filtering (broadcast storm protection) to prevent network downtime
- Local and remote alarm diagnostics
- Auto-negotiate 10 or 100 Mbps
- Removable, pluggable terminal strips
- Non-Blocking, Full Wire Speed Transmission
- Software configurable
|
 |
EOTec 2000 Industrial Ethernet Unmanaged Switches and Media Converters
The EOTec 2000 unmanaged switches and media converters are industrially hardened DIN-rail mountable devices that enable you to extend your industrial Ethernet network. An integrated backplane allows for easy cascading of two devices together to create an Ethernet "trunk line" over fiber. By cascading two media converters together you can create a 4-Port switched media converter (2-fiber, 2-RJ45), or achieve multi-mode to single mode conversion. Multiple other combinations are also possible.
Features:
- Compact DIN-Rail enclosure
- FM approved for Class 1, Div 2 Hazardous locations (selected models)
- Industrial Operating Temperature Range (-40 to 85°C)
- M modules can be cascaded together
- LED Diagnostic Indicators
- Redundant, flexible power supply options for 24VDC and 120/240VAC power source
|
 |
Lynx Series Light to Fully Managed Industrial Ethernet Switches
The Lynx series of managed switches have been designed for complex networks in harsh environmental conditions. Typical applications include intelligent transport systems, railway signal systems, substation automation, wind turbines and military & merchant marine installations. The Lynx series starts with the L100/L1100 light managed Ethernet switches and reaches up through L300/L1300 standard managed switches with ring redundancy, all the way to full switch management in the L400/L1400.
Features:
- Three levels of Management (light to fully managed)
- Industry-specific approvals for Marine, Rail, Substation Automation
- FRNT (Fast Re-configuration of Network Topology)
- Switch Management via Free IP Config tool or SNMP
- Auto MDI/MDI-X technology
- User configurable fault contact
- High Optical Dynamic Range for distances of 2, 15, 40, 85 and 120 km.
- Removable fiber transceivers
- GbE Support on fiber ports (new)
|
|
|
