EOTec 2104 Features

Industrial Ethernet Fiber Optic Networking:

• Simple like unmanaged, but features like managed switch
• Ethernet compliancy IEEE 802.3, 802.3u, 802.3x, 802.3z, 802.1p and more
• Supports Traffic Prioritization IEEE 802.1p, Q0S, CoS, ToS for real time data transfer
• Port mirroring for mapping messages between ports
• Message rate filtering (broadcast storm protection) to prevent network downtime
• Ultra Electronics, NSPI Compact Enclosure (45mm wide), DIN-rail mount
• Two SC or ST 100BaseF (multimode and single mode) fiber optic ports
• Two RJ-45 copper Ethernet ports 10/100Mbps
• Removable, pluggable terminal strips
• Non-Blocking, Full Wire Speed Transmission
• Software configurable

Industrial Ethernet Self-Healing Ring Topology:

• Redundant self-healing ring operation
• Ultra Fast Link Loss Recovery Time (< 30ms + 5ms/hop)
• No IP Address and no master switch selection required
• Ring operation for up to 50+ switches
• PROTOCOL INDEPENDENT

Automatic (Plug ‘N Play Operation):

• Auto-crossover RJ45 MDI/MDIX
• Automatic Address Learning
• Automatic Master Switch selection
• Auto-sensing Full or half duplex
• Automatic and dynamic Buffer allocation per port
• Pre-configured for Ring operation
• Automatic Power Saving
• Auto-negotiating 10BaseT, 100BaseT
• Auto-polarity

Expandable and Scalable:

• Expandable and scalable ports through integrated backplane
• Store and forward mode
• 3.2 Gbps Memory bandwidth for full wire speed on all ports
• Flow control for half or full duplex
• MAC address aging after 300s

Alarm Diagnostics:

• Power and Switch status LED indicator
• Global Ring Status Alarm LED indicator
• Global (OK) Relay Alarm Contacts
• Local Relay (A1 & A2) Alarm Contacts
• Remote status monitoring using Modbus over Ethernet (UDP)
• Backplane port activity Status LED indicator
• Port Status ACT and LINK LED’s combined into one LED per port

Designed for Industrial Environments:

• FM (US & Canada) Class1, Div. 2 hazardous area certification
• -40 to +85° C operating temperature range
• 15-40 VDC power input via screw terminals
• Redundant power available via backplane (120/240VAC)
• Supports long distances between drops, 2 km (MM), 15, 40, 60 km (SM)
• CE FCC part 15, ICES-003, EN55022 EMI emissions
• 1500 VRMS 1 minute Ethernet isolation
• 15,000 watts peak Transient protection
• UL 94V-0 Packaging